Loading ...
Loading ...
Loading ...
! ! ! !
4!
!
NOTE TO INSTALLER: To avoid damage that will not be covered under warranty
make sure blowers are free from obstructions (packing and debris) prior to
running the blowers. Test run blowers before finalizing installation. Check with
manufacturer before attempting to use blower systems other than Prestige®
blower systems. (800-358-8886 for technical information)
Cleaning and Maintenance
Your hood will not function properly if not cleaned regularly and maintained properly.
Clean the filters regularly (at least twice a month or every 24 hours of use) by soaking
them in soapy water and rinsing them in the dishwasher at the normal cycle. When the
filters are removed, the accessible interior of the canopy can be cleaned of grease,
again using only soap and water. Burned out halogen light bulbs are exchanged in the
same way as normal light bulbs. Make sure to replace them with the same type and
wattage. (Replacement bulbs are Par 16, 60 watt, halogen 115 volt.) Make it a habit to
turn on the hood on low speed even when you are only boiling water. The cleaning of
the outside of the hood depends on the material used as a decorative exterior. For
stainless steel and powder coated metals, clean with soap and water only. Do not use
abrasive or aggressive chemicals! Check the outside end of the duct at least once a
year. Make sure that the back draft damper (sold separately) hinges are free of grease
and move easily. If you have an insect screen installed in the duct termination, make
sure that it is not broken or dislocated. Filters are dishwasher safe or you may hand
wash them with warm soapy water.
Loading ...
Loading ...
Loading ...