Loading ...
Loading ...
Loading ...
Section 4 - REPAIR & ADJUSTMENTS
,_ WARNING _IL J Move _\l
-F;--6 co:T-o, TO R CLINGMODE,SHOWN
Before attempting any adjustments or repairs, STOP I s X=SPEE_POS STARTMOUNTEDON
the engine, remove the spark plug wire from the I / RIG-ITSlDEO _iDL
spark plug and secure wire away from plug. I
SIXTH SPEED
4.3.1. Cleaning Drive Disc & Driven Disc.
If oil or grease on the drive disc or driven disc is
causing slippage, clean discs as follows:
1. Wipe away any oil or grease with a clean cloth.
2. Use either an approved grease solvent or hot,
soapy water to clean drive disc or driven disc.
3. Rinse components with clean water.
4. Dry components with a clean cloth.
4.3.2. Drive Spring Repair/Replacement
POSITION I
If drive spring is loose, reconnect as shown in Figure
4.7. If spring is broken, replace with new spring.
FIGURE 4.8
2. Remove driven disc spring from driven disc
assembly. Loosen connector hex nut. See Figure 4.9.
o,,:' o,o
FIGURE 4.7
4.3.3. DRIVEN DISC ADJUSTMENT
If the drive disc and driven disc are clean and the
mower drive is still slipping, adjust the driven disc as
follows:
FIGURE 4.9
1. Place shift rod in the sixth speed position. See
Figure 4.8.
14
Loading ...
Loading ...
Loading ...