Loading ...
Loading ...
Loading ...
Operating Instructions
(continued)
TO OPERATE ON FAN ONLY:
timer [ temp/timer
[]c%
fanonly
MODE V ON-OFF
"_ DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
YOU WILL SEE:
timer I t_plt_
•fan only
HODE V ON-OFF
Note: Use this function only when cooling is not desired,
such as for room air circulation or to exhaust stale air on
some models. (Remember to open the vent during this
function, but keep it closed during cooling for maximum
cooling efficiency,) You can choose any fan speed you
prefer, (Except "Auto Fan").
During this function, the display will show the actual room
temperature, not the set temperature as in the cooling
mode.
timer
COOL FEATURE:
I temp/timer
cool F
econ
[]fanonly
V ON-OFF
\[\ DO THIS:
PRESS
MODE BUTTON
CHOOSE COOL
YOU WILL SEE:
timer [ tem;/tim_r
[]CO01 F
econ
fan only
MODE V ON-OFF
Note: In this mode, the fan remains on all the time with the
compressor cycling on and off when room temperature is
reached.
SLEEP FEATURE: YOU WILL SEE:
temp/timer 1
W F auto
m_ " fiLter
lo reset
V ON-OFF
A FAN SPEED _teep
/
DO THIS:
PRESS
SLEEP BUTTON
@2009 Electrolux Home Products, Inc.
temp/timer 1
F auto
lo
V ON-OFF A FAN SPEED
fi[ter
reset
[]
sLeep
Note: In this mode the selected temperature will increase
by 2 °F 30 minutes after the mode is selected. The tempe-
rature will then increase by another 2 °F after an additional
30 minutes. This new temperature will be maintained for 7
hours before it returns to the originally selected tempera-
ture. This ends the "Sleep" mode and the unit will continue
to operate as originally programmed. The "Sleep" mode
program can be cancelled at any time during operation by
again pressing the "Sleep" button,
All rights reserved.
Loading ...
Loading ...
Loading ...