Loading ...
Loading ...
Loading ...
Operating the Dishwasher en-us
39
Sensor setting
The wash cycle sequence is
optimized in Auto wash cycles with
the aid of sensors. The sensors
adjust the wash cycle strength of
Auto wash cycles depending on the
amount and type of soiling. You can
adjust the sensitivity of the sensors in
3 stages.
Standard: This setting is recommend
for daily regular or typical use. This is
the most energy efficient setting.
Sensitive: This setting adjusts the
wash cycle strength for the effective
removal of food remnants, even if the
amount of soiling is low. The energy
and water consumption is increased
accordingly.
Very sensitive: This setting adjusts
the wash cycle strength for difficult
conditions of use, for example firmly
dried on food remnants. This setting
is recommended if using biological
or eco detergents which contain
lower amounts of active agents. The
energy and water consumption is
increased accordingly.
Extra Dry
The final rinse uses a higher
temperature which improves
the drying result. The cycle time may
increase slightly. (Caution if utensils
are delicate!) You can switch the
Extra Dry function on or off. There is
a slight increase in energy
consumption.
Eco forecast
When Eco forecast is activated, the
average water and energy
consumption of the selected wash
cycle is briefly displayed in the digital
display @.
Auto power off
This setting determines the length of
time the control panel stays
illuminated after the cycle is
complete.
To save energy, the recommended
setting is “after one minute”.
Possible settings are:
■ off: The appliance does not
switch off automatically.
■ After one minute: The appliance
switches off after 1 minute. This is
the most energy efficient setting.
■ After two hours: The appliance
switches off after 2 hours.
Tone volume
The end of the wash cycle is
indicated by a buzzer. You can also
change this setting.
Button volume
When you are operating the
dishwasher, a signal sounds
whenever a button is pressed. You
can control the volume of the signal.
If you do not like the button volume,
you can switch it off.
Greeting
When you switch on the dishwasher,
the brand logo appears. You can
switch off the brand logo.
Factory setting
You can reset all settings to the
factory setting.
Loading ...
Loading ...
Loading ...