Loading ...
Loading ...
Loading ...
Using Your Cooktop
Stainless Steel Cooktop
Control
knobs
The control knobs are in front of tile burner,
grille or griddle (on some models) they control.
The burners have an infinite number of heat
settings as tbere are no fixed positions between
HI and LO.
To turn ON a burnm; push the control in, then
turn it counterclockwise to the LITE position.
Check to be sure the burner you turned on is tile
one you want to use.
You will heal" tile ignitor click. When tile gas is
ignited all around the burner and into tile
central simmer burner below tile simmer cap,
turn tile knob back to the desired setting.
When using tile simmer burner always ensure
that it lights from tile main burnen
Pushthecontrolinandturnitcounterclockwise
totheLifeposition,
Burners
Your new professional gas cooktop is equipped
witb burners typical of tbose used in restaurants.
These burners are designed in two pieces 1or easy
cleaning and control.
The center, smaller cap covers and protects tile
simmer burner from boilovers tbat could put the
flame out. This cap also spreads the simmer
burner heat out to avoid too much heat being
concentramd on tile center of tile pan.
The simmer burner is alv_-ayson when tile burner
is in use. The burner should never be operated if
the simmer cap is not in place.
The outer cap/port ring constitutes the main
burner and is in operation between tile HI and
LO settings.
The burners have electronic spark ignition to
eliminate continuously burning pilots. When
the outer cap/port ring is on and the flame is
blown out, it will relight. The burners are rated
at 15,000 BTU around the outer cap/port ring.
When turned to the simmer setting, only the
center of the burner is lit, and it is rated at
500 BTU.
Simmerburner
Simmercap
;ap/portring
Loading ...
Loading ...
Loading ...