Loading ...
Loading ...
Loading ...
Care and Maintenance
Cleaning the Spray Arms
NOTICE
Dirt and/or calcium residue may block the nozzles on the spray arms. for
this reason, regularly check the spray nozzles.
1 Lower spray arm
2 Upper spray arm
• Remove the lower rack from the machine.
• Pull off the lower spray arm in an upward direction A.
• Loosen the fastening screw of the upper spray arm and pull off the
spray arm B by a downward motion.
• Clean the spray arms under running water.
• Replace the lower spray arm in a downward direction.
• Replace the upper spray arm and tighten the fastening screw by
turning it around to the left.
• Insert the lower rack.
37
CAUTION
Made sure the fastening screw is tight on the upper spray arm.
Check if the holes on the top of the
third spray arm are clogged. If they are
clogged, remove and clean them.
To remove them, slightly push them
upwards (1) and then turn clockwise (2).
To replace the impeller, seat it into its
slot, push slightly upwards and turn it
counter clockwise until it is securely fitted. When the impeller is
released, check if it rotates without any obstruction.
F21314 EN:F21042 EN.qxd 10/23/2013 1:04 PM Page 38
Product Care
Loading ...
Loading ...
Loading ...