Loading ...
Loading ...
Loading ...
towardstheoperator.Pinchingthe
sawchainalongthetopoftheguide
barmaypushtheguidebarrapidly
backtowardstheoperator.Eitherof
thesereactionsmaycauseyoutolose
controlofthesawwhichcouldresultin
seriousinjurytouser.
THE FOLLOWING PRECAUTIONS
should be followed to minimize
kickback:
GRIP SAW FIRMLY = Hold the pole
saw firmly with both hands when the
motor is running. Use a firm grip
with thumb and fingers of one hand
encircling the control handle, and the
thumb and fingers of the other hand
encircling the fiberglass pole.
DO NOT OVERREACH.
KEEP PROPERFOOTING and
batanceatalttimes.
DO NOT LET the nose of the guide
bar contact a tog, branch, ground or
other obstruction.
ONLY USE REPLACEMENT bars and
chains specified by the manufacturer.
Store these instructions by folding in
half and sliding into the slot in the back
of the walt charging rack.
SAVE THESE iNSTRUCTIONS
= A •
CAUTION: Do not use a replacement
chain unless:
It has been designated as
meeting the ANSI B175
kickback performance
requirements on that specific
powerhead;
It has been designated as
"Low-Kickback" saw chain
in accordance with ANSI
B175.1; or
It is the saw manufacturer's
replacement catalogue (or
equivalent) number.
Low-Kickback saw chain is a chain
which has met the kickback performance
requirements of ANSI B175.1 when
tested on the representative sample of
chain saws.
Glossary of Terms
Drive Sprocket or Sprocket - The
toothed part that drives the saw chain.
Guide Bar-A solid railed structure that
supports and guides the saw chain.
Guide Bar Scabbard - Enclosure fitted
over the guide bar to prevent contact
with the saw chain when the pole saw
is not in use.
Kickback - The backward and upward
motion, or both of the guide bar
occurring when the saw chain near the
nose of the top area of the guide bar
contacts any object such as a log or
branch, or when the wood closes in and
pinches the saw chain in the cut.
Low-Kickback Chain - A chain
that complies with the kickback
performance requirements of ANSI
B175.1-1991 when tested on a
representative sample of chain saws.
Reduced Kickback Guide Bar
-A guide bar which has been
demonstrated to reduce kickback
significantly.
Replacement Saw Chain -A chain
that complies with the kickback
performance requirements of ANSI
B175.1-1991 when tested with specific
chain saws. It may not meet the ANSI
performance requirements when used
with other saws.
Saw Chain - A loop of chain having
cutting teeth, that cut the wood, and
that is driven by the motor and is
supported by the guide bar.
Spiked Bumper (Spike) - The pointed
Loading ...
Loading ...
Loading ...