Loading ...
Loading ...
Loading ...
13
To Select Operating Mode:
To choose the operating mode press the Mode button . Each time you press the button a
mode is selected in a sequence that goes from Auto, Cool, Dry, to Fan. The indicator light
beside the Mode button will be illuminated and remain on once the mode is selected.
To Operate in Auto Mode:
• When you set the unit to “Auto” mode it will automatically select Cooling or Fan Only
operation depending on the temperature selected and the current room temperature.
• Once the temperature you selected is achieved the unit will automatically maintain the
room temperature.
• In this mode the fan speed cannot be adjusted. It will start automatically at a speed
calibrated to the actual room temperature.
To Operate in Fan Only Mode:
• Use this function only when cooling is not desired, such as for room circulation or to
exhaust air (remember to open the vent). You can choose any speed you prefer.
• During this function the display will show the actual room temperature as in the cooling
mode.
• In Fan Only mode, the temperature is not adjusted.
To Operate in Dry Mode:
In this mode, the air conditioner will operate as a dehumidifier. Because the conditioned
space is closed or sealed, some degree of cooling will continue to occur.
To Use Energy Saver Feature:
To start the Energy Saver, press the Energy Saver button . This feature is available on
“Cool”, “Dry”, and “Auto”. The fan will continue to run for 3 minutes after the compressor shuts
off. The fan then cycles on for 2 minutes at 10 minute intervals until the room temperature is
above the set temperature, at which point the compressor turns back on and cooling starts.
To Use the Sleep Feature:
To initiate, press the Sleep button . In this mode the selected temperature will increase
(cooling) by 2°F (1°C) 30 minutes after the mode is selected. The temperature will then
increase (cooling) by another 2°F (1°C) after an additional 30 minutes. This new temperature
will be maintained for 6 hours before it returns to the originally selected temperature. This
ends the Sleep mode and the unit will continue to operate as originally programmed. The
Sleep Mode program can be cancelled at any time during operation by again pressing the
Sleep button.
Loading ...
Loading ...
Loading ...