GE - General Electric ZBD9900RII GE Monogram Fully Integrated Dishwasher

User Manual - Page 21

For ZBD9900RII.

PDF File Manual, 54 pages, Download pdf file

Loading ...
Loading ...
Loading ...
21
Before You Call for Service
Dishwasher
Problems Possible cause Action
The dishes
are not
clean
• The spray arms are not rotating
• Old dishwasher detergent.
Note: Detergent is a perishable
• Incorrect dosage of detergent
• Insuciently powerful dishwashing
program
• Incorrect program chosen
• Incorrect loading of the dishwasher
• Glasses and cups have tipped over during
the wash
• Lift o the arms and clean
• Avoid large packs
• Dispense according to the level of water
hardness
• Select the TEMP BOOST or switch to a more
powerful wash setting
• Change to a more powerful wash setting
• Do not cover china with large bowls or
similar
• Avoid placing very tall glasses in the corners
of baskets
• Load the china securely
Stains or a
lm on the
china
• Dishwasher tted with water softener is
leaking salt
• Incorrectly set rinse aid dispenser
• Phosphate-free detergent in combination
with hard water
• Too high a temperature and/or too
much detergent can cause etching on
(crystal) glass. Unfortunately this cannot be
remedied, only prevented!
• Check that the cover of the salt
compartment is properly screwed on.
Otherwise phone for Service
• See the chapter on rinse aid
• Change detergent
• Wash (crystal) glass at a low temperature
and dispense dishwasher detergent with
care. Contact the dishwasher detergent
manufacturer.
The china
has a
whitish-
blue sticky
lm
• Too high dosage of rinse aid • Reduce dosage. See the chapter on rinse
aid. If the water is very soft, you could try
diluting the rinse aid (1 part rinse aid, 1 part
water).
Loading ...
Loading ...
Loading ...