Loading ...
Loading ...
Loading ...
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
® Loads containing
tough, baked-on
food.
HI-TEMP
WASH
Increases the target water temperature during the wash portions of
the cycle.
Adds heat, wash time and water to the cycle.
Adaptive Wash, Pots &
Pans or Normal cycle
e To sanitize you_ Raises the water temperature inthe final dnse to approximate!y Adaptive Wash; Pots &
dishes and 1550F (68°C), This high temperature rinse sanitizes your dishes Pans or Normal cycle,
k,..J g!assware in and glassware in accordance with NSF/ANSI Standard 184 for Only these sanitization
SAN_. accordance with Residential Dishwashers. Certified residential dishwashers are not cycles have been
RNSE
NSF/ANS! Standard intended for licensed food establishments, designed to meet the
184 for Res dent a . i . i . i NSF/ANS requrements
13ishWashersl
o For best drying Turn OFF when loads contain plastic dinnerware that may be Available with any cycle
results, dry dishes sensitive to high temperatures, except Rinse Only.
with heat. This option with the use of rinse aid will provide the best drying
HEATED performance.
DRY
i To run your dish Delays the start of a CYCleup to 6 houis: All CYciesl except Rinse
® o o washer at a ater On y
, . Select awash cYcle and optionsl Press DelaY until ieaChing the
ume or aurlng of]
("_ , , - desired hours for the delay to start. Press START/RESUME. Close
peaK noursl the door firmly,
Control Lock Toavoid unintended To turn on Lock, press and hold Heated Dry for at least 4 seconds. Anytime
® ® use of your To turn off Lock, press and hold Heated Dry for at least 4 seconds.
O t_ dishwasher, or cycle
and option changes When Control Lock is lit, all buttons are disabled. If you press any
HEATED during a cycle, pad while your dishwasher is locked, the light flashes 3 times. The
DRY dishwasher door can be opened while the controls are locked.
COMMENTS
RESUME
@
®
CANCELI
DRAIN
To cancel wash cycle Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
Tofollow the The washing indicator glows at the start of the first fill of anYcYCle (except Rinse Only) and
Washing progress of your remains on until the end of the main wash cYCler
0 dishwasher cYCle
To follow the
Drying progress of your
0 dishwasher cycle
The Drying indicator glows during the drying portion of each cycle (except Speed Wash and
Rinse Only).
To follow the Clean indicator glows When a cyCle is finished.
Sanitized
0
To follow the
progress of your
dishwasher cycle
If you select the Sani Rinse option, when the Sani Rinse cycle is finished, the "Sanitized"
indicator glows. If your dishwasher did not properly sanitize your dishes, the light flashes at the
end of the cycle. This can happen if the cycle is interrupted, or the water could not be heated to
the required temperature. The light goes off when you open and close the door or press
CANCEL.
Loading ...
Loading ...
Loading ...