Gaggenau DF210500 200 Series Fully Integrated Dishwasher

User Manual - Page 36

For DF210500.

PDF File Manual, 60 pages, Read Online | Download pdf file

DF210500 photo
Loading ...
Loading ...
Loading ...
aus Basic settings
36
Basic setting Selection Description
Emotion Light off
On via main switch
1
On on opening door
Switch the interior lighting of the appliance on or
off.
When the appliance door is opened, the interior
lighting switches off automatically after 10
minutes.
Infolight on
1
off
Switch "Infolight" on or off.
While the programme is running, a spot of light is
projected onto the floor below the appliance
door. This light will not be visible if the appliance
is installed at eye level with the cabinet front fit-
ted flush. If the appliance door is not completely
closed, the spot of light will flash. The pro-
gramme has ended when the spot of light is no
longer visible on the floor.
Start programme Eco
1
Prog. last selected
Set a default programme for when the appliance
is switched on.
Tone volume Scale with multiple
levels.
Set the signal volume at the end of the pro-
gramme.
Level 0 switches the signal tones off.
Button volume Scale with multiple
levels
Set the button volume during operation.
Level 0 switches the button tones off.
WLAN on
off
1
Switch the wireless network connection on or off.
Remote Start off
Manuell
1
Dauerhaft
Activate or deactivate
→"Remote Start ", Page38.
Greeting on
1
off
Switch display of the brand name logo on or off
when the appliance is switched on.
Factory setting Reset Restore changed settings to the factory settings.
The settings for initial start-up must be con-
figured.
1
Factory setting (may vary according to model)
Changing basic settings
1. Press ⁠.
2. To open the basic settings, press
for approx. 3seconds.
3. Press repeatedly until the display
shows the required setting.
4. Press or repeatedly until the
display shows the right value.
You can change several settings.
5. To save the settings, press for
approx. 3seconds.
Setting the time
1.
To open the basic settings, press
for approx. 3seconds.
2. Press repeatedly until the display
shows "Time setting".
3. Press or repeatedly until the
display shows the required time.
Loading ...
Loading ...
Loading ...