Loading ...
Loading ...
Loading ...
USE - 61914779561/E
e
10.Press the button to start the function.
The appliance will begin preheating.
When cooking is started:
1. Select a cooking function (for example
"FAN ASSISTED ").
2. Turn the temperature knob to set the cooking
temperature (for example "190°C").
3. Press the button to start the function.
The appliance will begin preheating.
At the end of preheating:
4. Open the appliance door.
5. Insert the tray on which the food has been
placed into the appropriate guides.
6. Insert the plug of the temperature probe into
the socket at the side, using the probe to
open the protective cover.
The indicator light flashes on the display.
7. Close the door.
8. Press the button on the display to
change the target temperature.
9. Turn the temperature knob to set the target
temperature (for example "80°C").
10. Press the button to confirm the set
target temperature.
11. Press the button to start the function.
End of cooking parameters with the
temperature probe
Cooking ends when the instantaneous
temperature reaches the target temperature set
by the user.
Heating elements are deactivated, an acoustic
signal sounds and the display shows .
1. Open the door.
2. Remove the probe from the food and unplug
it from the socket.
3. Remove the food from the oven.
4. Make sure that the protective cover is
properly closed.
5. Close the door.
Cooking advice
General advice
• Use a fan assisted function to achieve
consistent cooking at several levels.
• It is not possible to shorten cooking times by
increasing the temperature (the food could
be overcooked on the outside and
undercooked on the inside).
Advice for cooking meat
• Cooking times vary according to the
thickness and quality of the food and to
consumer taste.
• Use a meat thermometer when roasting
meat, or simply press on the roast with a
spoon. If it is hard, it is ready; If not, it needs
another few minutes cooking.
Advice for cooking with the Grill and the Fan
with grill
• Meat can be grilled even when it is put into
You can skip the preheating phase by
holding down the button for a few
seconds.
Loading ...
Loading ...
Loading ...