Loading ...
Loading ...
Loading ...
8
1886
Ceiling Bracket Hanging Fan Wiring Installing Fan Body Blades Light Remote App
Installing the Bulbs and Glass
Assembling the LIght Kit
Fan style may vary.
Note:
Fan style may vary.
Note:
WARNING
FAN FALL HAZARD
Make sure all three screws are tight to secure
the trim ring to the mounting plate.
Feed the wire plugs through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws
and twist counterclockwise.
Connect the single-pin
connectors from the
light kit assembly to the
connectors from the fan.
Connect the white wires
together. Connect the blue
and black wires together.
Install the included LED
bulbs into the sockets.
When necessary, replace
with bulbs of same wattage.
Lift the globe and align the
notches in the globe with
the tabs in the light kit.
NOTE: Check to ensure
proper engagement.
Attach the globe by lifting and
turning clockwise one third of a
full turn of the glass until it stops.
Notch
Tab
WARNING
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make
sure that glass is properly secured.
Loosen the two pre-installed screws
After rotating the upper switch housing into
place, tighten all three screws securely.
Carefully push all switch housing components into the
switch housing, then install the switch housing plate
using the two pre-installed light kit screws.
Loading ...
Loading ...
Loading ...