LG Electronics WV10-1410B OWNER'S MANUAL

Loading ...

INSTALLATION

ENGLISH

connector latch plate. Make sure the adapter

locks into place.

NOTE

• After connecting the water inlet hose to the

water tap, turn on the water tap to flush out

foreign substances (dirt, sand, sawdust, and etc.)

in the water lines. Let the water drain into a

bucket, and check the water temperature.

Connecting the Hose to the

Appliance

Screw the supply hose to the water inlet valve on

the back of the appliance.

• Do not connect the hose to the hot water supply

for models with one water inlet. Connect to the

cold water supply only.

NOTE

• After completing connection, if water leaks from

the hose, repeat the same steps. Use the most

conventional type of tap for the water supply. In

case that the tap is square or too big, remove the

guide plate before inserting the tap into the

adaptor.

• Make sure that the hose should not be kinked or

trapped.

Installing the Drain Hose

Installing the Drain Hose with

the Elbow Bracket

The drain hose should not be placed higher than

100 cm

above the floor. Water in the appliance may

not drain or may drain slowly.

• Securing the drain hose correctly will protect the

floor from damage due to water leakage.

• If the drain hose is too long, do not force it back

into the appliance. This will cause abnormal

noise.

105 cm

global_main.book.book Page 19 Tuesday, February 8, 2022 2:42 PM

Loading ...

LG WV10-1410B 10kg Series 10 Front Load Washing Machine