Loading ...
Loading ...
Loading ...
Troub eshootin 9
The wash program is still
underway, it is in a'quiet'
phase that is needed for
ensuring the best wash
results.
No action required. The program will
transition into a more audible phase after the
'quiet' phase is over.
The wash program
seems to have
finished (the
dishwasher is idle),
but the end of
wash beeps haven't
sounded and the
drawer cannot be
opened
Water pooling on This is normal condensation. If there is any water over the control buttons,
inner rim of drawer wipe dry.
after a wash
Water under the This is normal and needs no action.
drain filter
Excess water in the Drain hose(s) bent or Straighten the drain hose(s).
drawer kinked.
Blocked filters. Clean the filter plate/drain filter. Refer to
'User maintenance instructionst
Water marks on the Rinse aid depleted. Refill the rinse aid dispenser.
dishes
Rinse aid setting too low. increase the rinse aid setting.
Dishwasher overloaded/ Refer to the section on loading.
incorrectly loaded.
Drawer interior is Some foods, like tomato Pre-rinse dishes before placing in the drawer.
stained based products, may stain Alternatively, using the Rinse program after
the inside of the drawer, adding the dishes may minimise staining.
Dishes did not dry Incorrect loading. Ensure the dishes are not nesting together.
Dishes were left in the
drawer for several hours
after a wash.
We recommend unloading the dishes within
a few hours after a wash program has
finished, as the small amount of vapour [eft
after the wash may -with time- resettle on
dishes as condensation. Using rinse aid or
increasing its setting may also help reduce
this problem.
Rinse aid depleted. Refill the rinse aid dispenser.
Rinse aid setting too low. Increase the rinse aid setting.
Eco wash program used. Choose a standard wash program.
No detergent Detergent dispenser was Clean the dispenser and ensure it is dry
dispensed wet when loaded, before adding detergent.
Excessive motor The filter plate and/or spray Refer to the 'User maintenance instructions'
noise arm is incorrectly placed, section for details on correct placement.
No water in the motor area. This usually occurs on the first use or when
the dishwasher has not been used for long
periods of time. Pour 3 cups of water into
the drawer before running a wash program.
Loading ...
Loading ...
Loading ...