Loading ...
Loading ...
Loading ...
16 INSTALLATION
6
Make sure that the door-switch located inside the cover
is tightly connected. Place the cover D in its position and
tighten the cover screw _.
_-_ NOTE
Collet
Insert Line
Clip
) Gently press the Collet and insert the tube until only
one line shows on the tube.
(Correct)
(Incorrect)
Pull the tube to make sure that the tube is tightly
fastened and then insert the clip.
J
Removing the Freezer Drawers
The top, middle and bottom drawers are all removed in the
same way. In the following figures, the Pullout Drawer
located above the freezer drawer is not shown for clarity.
CAUTION
• Use two or more people to remove and install the
freezer drawer. Failure to do so can result in back
or other injury.
• Do not hold the handle when removing or replac-
ing the drawer. The handle may come off and it
could cause personal injury.
• Be careful of sharp hinges on both sides of the
drawer.
• When you lay the drawer down, be careful not to
damage the floor.
• Do not sit or stand on the freezer drawer.
• To prevent accidents, keep children and pets away
from the drawer. Do not leave the drawer open.
If the Durabase ® storage bin is removed from the
freezer drawer, there is sufficient space inside for
a small child or a pet to get into.
(Durabase®)
1 Pull the drawer open to full extension.
2 Lift up the basket and bin inside the drawer. (Images
D, _ in the figure below may differ from the actual
drawers of the refrigerator.)
Loading ...
Loading ...
Loading ...