Loading ...
Loading ...
Loading ...
33
EN
C Adjusting the water hardness
level is explained in Water
Softening System section.
Rnse Ad ndcator (
)
Please check the rnse ad ndcator
on the dsplay to see whether there
s adequate amount of rnse ad n the
dshwasher or not. You need to refll
the rnse ad reservor wth rnse ad
whenever rnse ad ndcator appears
on the dsplay of your machne.
End of programme
End of Programme ndcator wll lght
up once the washng programme s
over.
1. Press the On/Off key to turn off
your machine.
2. Close the tap.
3. Unplug the machine from the
socket.
C For energy saving, the machine is
automatically turned o following
the completion of the programme
or if the programme is not started.
C Leave your dishes in the machine
for about 15 minutes to allow
them cool down after they are
washed. Your dishes will dry in a
shorter time if you leave the door
of your machine ajar during this
period. This process will increase
the drying eectiveness of your
machine.
Water cut-o warnng
If mans water s cut or water nlet
tap s turned o the machne cannot
take water n and P2 con wll ash
on the programme ndcator. As
long as the problem contnues,
washng programme s paused and
the water nlet s checked regularly
by the machne; when the water s
restored P2 con wll dsappear after
a whle and the washng programme
resumes.
Overowng warnng
If the machne ntakes too much
water or there s leakage at any of
the components then the machne
wll detect ths and P1 con wll ash
on the Programme ndcator. As long
as the overowng contnues safety
algorthm wll be actve and try to
dscharge the water. If overowng
stops and safety s assured, P1
con wll dsappear. If P1 does not
dsappear, there s a permanent fault.
In ths case the authorsed servce
should be contacted.
Loading ...
Loading ...
Loading ...