Kenmore 66595144300 electric range

User Manual - Page 10

For 66595144300.

PDF File Manual, 56 pages, Download pdf file

Loading ...
Loading ...
Loading ...
ELECTRONIC OVEN CONTROL
B C D E F G
........MEAT';/ SLOW
.................................POULTRy COOKER
COGKmES PIZZA
H K
SET
r_
[] 5 SEC [_
M N O P
A. RECIPE RECALL TM
B. Slow cooker
C. Display
D. Add 1 minute
E. Timer
E Coektop lockout (on some models)
Cooktop light (on some models)
G. Oven light/oven lockout
H. Oven selectors
(SERVE WARM - on some models)
L Self-clean
SENS-A-CLEAN TM (on some models)
LOGI-CLEAN TM (on some models)
SELECT CLEAN TM (on some models)
J. Temperature setting
K. Timed cooking
L. Clock
M. Hour
N. Minute
O. Start
P Stop/clear
When power is first supplied to the appliance, make sure the
surface burners are in the OFF position. Everything on the display
will light up for 5 seconds. Then the time, "PF" will appear on the
display.
If "PF" appears at any other time, a power failure occurred. To
remove "PF" and to reset the clock, press STOP/CLEAR.
When the oven is in use, this display shows time, temperature
and what command pads have been pressed.
When the oven is not in use, the display will show the time of day.
The START pad begins any function. If the START pad is not
touched after touching another pad, "START?" will appear in the
display.
If cooking is interrupted, touching START will resume the preset
cycle.
The STOP/CLEAR pad stops any oven function except for the
Clock, Timer and Cooktop or Oven Lockouts.
After pressing STOP/CLEAR, the display will show the time of
day or, if the minute timer is also being used, the time remaining.
Cook time may be added in 1-minute increments, up to
99 minutes, by touching the ADD 1 MIN pad.
Touching ADD 1 MIN during a cook cycle will add 1 minute of
cook time at the current cook power.
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
1. Press CLOCK.
2. Press the HOUR/MIN "up" or "down" arrow pads until the
correct time of day shows on the display.
Press CLOCK or START.
Tones are audible signals, indicating the following:
One tone
Valid pad press
Oven is preheating, or has been preheated
Function has been entered
Three tones
Invalid pad press
10
Loading ...
Loading ...
Loading ...