Loading ...
Loading ...
Loading ...
DOUBLE INSULATION
Double insulation is a concept in safety in electric
power tools, which eliminates the need for the usual
three-wire grounded power cord. Al! exposed metal
parts are isolated from the internal metal motor
components with protecting insulation. Double
insulated tools do not need to be grounded.
IMPORTANT
Servicing of a tool with double insulation requires
extreme care and knowledge of the system and should
be performed only by a qualified service technician. For
service, we suggest you return the tool to your nearest
Sears Service Center for repair. Always use original
factory replacement parts when servicing.
EXTENSION CORDS
The use of any extension cord will cause some loss of
power. To keep the loss to a minimum and to prevent
tool overheating, use an extension cord that is heavy
enough to carry the current the tool will draw.
A wire gage size (A.W.G.) of at least 16 is
recommended for an extension cord 100 feet or less
in length. When working outdoors, use an extension
cord that is suitable for outdoor use. The cord's jacket
will be marked WA.
,_k CAUTION: Keep extension cords away from the
cutting area and position the cord so that it will
not get caught on lumber, tools, etc., during
cutting operation.
_k WARNING: Check extension cords before each
use. If damaged replace immediately. Never use
tool with a damaged cord since touching the
damaged area could cause electrical shock
resulting in serious injury.
Extension cords suitable for use with your saw are
available at your nearest Sears Retail Store.
The following recommended accessories are currently available at Sears Retail Stores.
7-1/4 in. 40 Tooth General Purpose Cut-Off Blade
7-1/4 in. 35 Tooth Master Combination Blade
7-1/4 in. 200 Tooth Plywood Blade
7-1/4 in. 18 Tooth Carbide Blade
7-1/4 in. 18 Tooth Mach II Silver Series Carbide Blade
7-1/4 in. 24 Tooth Mach II Silver Series Carbide Blade
7-1/4 in. 24 Tooth Combination Carbide Blade
Rip Guide
Dust Nozzle Kit - Part No. 982829-001
_L WARNING: The use of attachments accessories not listed be hazardous.
or
might
WARRANTY
FULL ONE YEAR WARRANTY ON CRAFTSMAN CIRCULAR SAW
If this I"RI_ICl'$MAN Circular Saw fails to give complete satisfaction within one year from the date of purchase,
RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES,
and Sears will replace it, free of charge.
If this r'RItFTINaH Circular Saw is used for commercial or rental purposes, this warranty applies for only 90
days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
19
Loading ...
Loading ...
Loading ...