Loading ...
Loading ...
Loading ...
3
Door reversal instruction
The following tool is required, flat screwdriver, phillips screwdriver, adjustable spanner,
socket wrench and 8mm socket.
1. Make sure that the power is disconnected.
2. Pry the hinge cover up , remove the three screws that secure the upper hinge to the
door, then remove the hinge.
3. Remove the refrigerator compartment door from the cabinet.
4. Remove the screws that secure the lower hinge to the right side of the cabinet, then remove the hinge.
5. Remove the washer and nut that secure the pin shaft to the right hole on the lower
hinge, then remove the shaft
6. Insert the pin shaft into the left hole on the lower hinge, then secure the shaft with the
washer and nut.
7. Install the lower hinge on the left side of the cabinet.
10. Remove the screw that secures the door stop from the bottom right of the refrigerator compartment door, then remove the door
stop and install to the bottom left side.
8. Install the refrigerator compartment door.
9. Move the door bushing from the top right side of the refrigerator door to the top left side of the door. And move the left hole cover
to the right side.
10. Remove the hole cover from the top left side of the cabinet, remove the cover and secures the cover on the top right side of the
cabinet.
11. Secure the upper hinge to the top left side of the cabinet with the three screws you removed previously. Before you tighten the
upper hinge screws, make sure that the top of the door is level with the cabinet and that the rubber gasket makes a good seal.
20. Install the hinge cover over the hinge on the top left side of the cabinet.
Refrigerator
door
Loading ...
Loading ...
Loading ...