Loading ...
Loading ...
Loading ...
Fills with the Wrong Temperature Water
° Turn both faucets on fully.
• Make sure temperature selection is correct,
• If Auto Temperature Control is selected, cold water may feel warmer than cold water from the tap tsee page 3).
• Make sure hoses are connected to correct faucets and inlet connections. Be sure water supply is regulated correctly.
Flush water line before filling washer.
• Check the water heater. It should be set to deliver a minimum 120 ° F (49° C) hot water at the tap. Also check water
heater capacity and recovery rate.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
• To obtain the energy savings_ warm water fills are lukewarm.
• To save energy, this washer will regulate wash water temperatures by mixing hot and cold water to reach the
proper water temperature.
10
Loading ...
Loading ...
Loading ...