Loading ...
Loading ...
Loading ...
O POWER/CANCEL
Touch to turn the dryer on and off. Touch to stop/cancel
a cycle at any time.
O
CYCLE CONTROL KNOB
Turn the knob to select a cycle for your laundry load. Sensor
Cycles are Heavy Duty, Normal, Delicates, Sanitize (on some
models), Bedding (on some models), and Wrinkle Control
(on some models). Timed Cycles are Timed Dry and Rapid
Dry. The Steam Cycle (on some models) is Refresh. See
"Cycle Guide" for detailed descriptions of cycles.
START/PAUSE
Touch and hold until the LED comes on to start a cycle,
or touch once while a cycle is in process to pause it.
O
LED DISPLAY AND SETTINGS
When you select a cycle, its settings will light up and the
Estimated Cycle Time (for Sensor Cycles) or actual time
remaining (for Timed Cycles) will be displayed. On 2-digit
displays, for times longer than 99 minutes, hours will be
displayed followed by minutes.
See "Cycle Guide" for available settings on each cycle.
Not all settings are available with all cycles.
-/+ (Timed Dry Adjust)
Touch "+" or "-" with Timed Cycles to increase or
decrease the length of a Timed Dry or Rapid Dry cycle.
Temperature
When using Timed Cycles or Refresh, you may select a
dry temperature based on the type of load you are drying.
Use the warmest setting safe for the garments in the load.
Follow garment label instructions.
NOTE: Sensor Cycles use a preset temperature that is
not adjustable.
Dryness Level
When using Sensor Cycles (except for the Sanitize cycle),
you may select a Dryness Level based on the type of load
you are drying.
NOTE: Dryness Level is for use with Sensor Cycles only.
Wrinkle Prevent
If you will be unable to remove a load immediately, touch
Wrinkle Prevent to add up to 140 minutes of periodic
tumbling to help reduce wrinkling. On some cycles, you
may select the "With Steam" setting to add a short steam
cycle after 60 minutes to help smooth out wrinkles.
Energy Saver
Touch to activate the Energy Saver option, which allows
you to increase your energy savings by using a slightly
lower heat level. For automatic cycles, Energy Saver will
increase drying times by approximately 40 minutes; the
LED Display will reflect this time.
Energy Saver will default on for Normal. For optimal energy,
turn on the Energy Saver option. For optimal time, turn off
the Energy Saver option.
O
O
OPTIONS
Use to select available options for your dryer. Not all cycles
and options are available on all models.
Drum Light
Touch to turn the LED drum light on or off. The light
will also turn on when the door is open, and turn off
automatically after about 5 minutes.
Reduce Static
Touch to add the Reduce Static option to selected
Sensor cycles (see "Cycle Guide"). The dryer will
automatically tumble, pause, and introduce a small amount
of moisture into the load to help reduce static. This option
acids approximately 8 minutes to the total cycle time.
Steam Boost
Steam Boost adds steam to the end of the Heavy Duty,
Bedding, or Normal cycle to help smooth wrinkles. Steam
Boost can be used with High or Medium heat settings.
This option acids approximately 15 minutes to the total
cycle time.
Wrinkle Prevent
If you will be unable to remove a load immediately, touch
Wrinkle Prevent to add up to 140 minutes of periodic
tumbling to help reduce wrinkling. On some cycles, you
may select the "With Steam" setting to add a short steam
cycle after 60 minutes to help smooth out wrinkles.
Damp Dry Signal
Touch to select the Damp Dry Signal. When selected, a
series of beeps will sound when the load is damp, but not
completely dry. This will allow you to take clothes out of
the load that do not need to dry completely. This option
is available on Heavy Duty, Normal, Wrinkle Control,
Bedding, and Delicates cycles. The Damp Dry Signal is
selected as a default for the Bedding cycle, as a reminder
to manually reposifion bedding loads midway through the
cycle.
Cycle Signal
Use this to turn the signal indicating the end of a drying
cycle on or off.
NOTE: You may also turn off the tones that sound when
a feature, setting, or option is touched. Touch and hold
Cycle Signal for about one second to turn sounds on
or off.
Control Lock
Use to lock the controls of the dryer and avoid
an accidental change in cycle options or preferences
during a drying cycle.
Touch and hold CONTROL LOCK for 3 seconds to lock
or unlock the controls of the dryer. During this time, the
LED Display will count clown 3-2-1. Once the controls
are locked, the LED Display will display "Lc" or "Loc:'
NOTE: The Control Lock function may be enabled when
recovering from a power failure. To unlock the control,
touch and hold CONTROL LOCK for at least 3 seconds.
CYCLE STATUS LIGHTS
The indicator bar on the right side of the control will let you
know what stage of the drying cycle is in process. For more
information on each stage, see "Cycle Status Indicators"
Loading ...
Loading ...
Loading ...