Loading ...
Loading ...
Loading ...
HEAT LIVE RELAX
OPERATING INSTRUCTIONS
TURNING ON & OFF
Once the unit is in stand-by mode, press the power button once to turn the unit on. The LED display will show the
current set temperature. Press again to put the appliance back into stand-by mode (only the decimal point will be
displayed). NOTE: If the power supply is interrupted while the unit is operating, the unit will restart at using the
same function when the power is reinstated.
POWER SETTINGS
There are 3 power settings, low, high and anti-frost. For normal operation, use the low or high settings. Once the
unit is operating, the setting can be changed by pushing the low power button or high power button. Generally,
start the unit using the high power setting (high power indicator lit), to heat the room as fast as possible. Once the
required temperature has been reached, the unit can be turned down to the low power setting low power indicator
lit) to save power but keep the same temperature.
The anti-frost setting runs the appliance at 5°C (the numeric display shows 5°C and the anti-frost indicator is lit).
Press once to activate, and then a second time to revert to the previous power setting (note there is no temperature
adjustment on this setting). Note: Timer functions do not work when using the anti-frost setting.
SETTING TEMPERATURES
While the unit is operating in either the low or high power modes, press the increase setting button or decrease
setting button once (decimal point is lit). Adjust the setting up or down by pressing the buttons. The numeric display
will flash for 5 seconds after the last button pressed and then store the setting (decimal point turns off). The
temperature can be set between 5°C & 35°C).
SETTING THE TIMER
While the unit is operating, press the timer button once. The numerical display will show the current timer setting
(0-24 hours) and the timer set indicator will light up. Adjust the timer setting up or down using the increase setting
button and decrease setting button. The numeric display (and timer setting indicator) will flash for 5 seconds after
the last button pressed and then store the timer setting. Once the timer finishes, the appliance will revert to the
stand-by mode. The timer will be disabled if the power button (A1) is turned off and on, the timer button is pressed
again or the timer setting is set to “0”. The timer will remain set if the main power switch is turned on and off, or the
power supply is interrupted.
A timer function can also be set to turn the appliance on after a set period of time. With the appliance in stand-by
mode, repeat the above sequence to set a time in hours. After 5 seconds, the display will turn off, but the timer set
indicator will stay on. When the set time has elapsed, the appliance will turn on. NOTE: Take care that the
appliance is in a safe position and nothing can accidentally be placed against it.
Timer settings can be adjusted at any time by pressing the timer button twice and adjusting the time as above.
MAIN POWER SWITCH
The main power switch is to the right of the control panel. After the heater is plugged in, switching this on allows the
heater to function & switching it off stops all functions.
CONTROL PANEL LOCK
The control panel buttons can be locked when operating or in stand-by mode. Press the increase setting and
decrease setting buttons together for 3 seconds and the display will show the lock symbol “[]” for 3 seconds and
then revert to the previous display. Pressing any button will cause “[]” to be displayed again with no change to the
functions. Turn the lock off by repeating the process. The lock will stay in place even if the main power button is
turned off and on, or there is a short power failure.
Loading ...
Loading ...
Loading ...