Loading ...
Loading ...
Loading ...
5 6
USING THE Four Seasons
™
1. Plug the unit into an electrical outlet and press the power button
to turn on your Four Seasons
™
unit.
2. Turn the mode knob to select the desired function. You may
choose to use either the heater, the humidifier, or the heater and
humidifier together.
Note: No matter which mode you select, the HEPA air purifier feature
will always be active.
3. Once you have chosen the mode you can control how much air passes
through your Four Seasons
™
unit by sliding the fan speed button to low,
medium or high as you prefer.
4. When you select either the heater mode or the heater + humidifier mode
you may control the amount of heat your Four Seasons
™
produces.
Choose low, medium or high heat output.
REPLACING THE HEPA FILTER
1. Make sure unit is turned off and unplugged. To remove the HEPA cover
frame, press the release tab and pull the frame outwards. See Figure 3A/B.
2. Remove the HEPA filter by pulling the filter out from the unit.
See Figure 4.
3. Insert a new HEPA filter, then place HEPA cover frame back into position.
CLEANING AND MAINTENANCE
WARNING: Always unplug the Four Seasons
™
unit prior to cleaning
or other maintenance.
CLEANING THE HUMIDIFIER WICK FRAME:
1. Remove the humidifier wick
frame as explained in the
“ASSEMBLY AND USE”
section of this manual.
2. With the humidifier wick
frame lying in front of you,
gently bend each side of the
wick frame to release the
bottom roller. See Figure 5.
3. Release the top roller from
the frame by carefully
bending back the frame
bracket and removing the
roller axle from the bracket
hole. See Figure 6. Remove
wick from rollers.
4. To clean the wick you may
wash it in your washing
machine on a gentle cycle or
use a mild detergent to wash
by hand. Rinse with clean
water. Be sure it is completely
dry before reinserting.
5. Reinsert the humidifier wick
into the rollers and then
insert the humidifier wick
frame into the unit.
Figure 5
Figure 6
Figure 3B Figure 4Figure 3A
Release
Tab
Loading ...