Loading ...
Loading ...
Loading ...
5
4. Move the switch to I. The light will come on and the kettle will start to heat.
5. When it boils, the kettle will switch off.
6. To switch off manually, move the switch to O, or simply lift the kettle off the
stand.
GENERAL
When you lift the kettle, you may see moisture on the stand. Don’t worry, it’s caused
by the steam used to switch off the kettle which is allowed to escape via vents
underneath.
BOIL DRY PROTECTION
1. This will shorten the life of the element. A boil-dry cut-out will switch the kettle
off.
2. You must then remove the kettle from its stand to reset the cut-out.
3. Sit the kettle on the work surface till it’s cold.
CARE AND MAINTENANCE
1. Unplug the stand, and let the kettle cool before cleaning.
2. Wipe all surfaces with a clean damp cloth.
3. Keep the connectors dry.
4. Open the lid.
5. Squeeze the top of the filter to release it from inside the rim of the kettle, then
lift it out of the kettle.
6. Rinse the filter under a running tap while brushing with a soft brush.
7. Fit the bottom of the filter into the seam between the floor of the kettle and the
wall.
8. Locate the filter in the rear of the spout.
9. Squeeze the top of the filter, then fit it under the rim of the kettle.
10. Close the lid.
Descale regularly, at least monthly
Descale the appliance at least monthly with a proprietary descaler.
Follow the instructions on the package of descaler.
Products returned under guarantee with faults due to scale will incur a repair charge.
Loading ...
Loading ...
Loading ...