Loading ...
Loading ...
Loading ...
Thor Kitchen Gas Rangetops
Installation with a range hood
Note: Minimum clearance for back wall is 0” with backsplash (backguard) or high shelf.
If a range hood is installed above the range top, maintain a 30” (76.2 cm) minimum clearance between
the rangetop and the bottom of the range hood.
The range hood must exhaust outside.
For best smoke elimination, the minimum clearance of the range hood should be installed 30” to 36”
above the rangetop surface. Recommended CFM should be 600 CFM for the 30” range top.
Do not install with a downdraft ventilation system
Installation in an island
Note: There must be a minimum of 6” (15.2 cm) clearance from rear of range top to a combustible wall.
Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified
by CSA. Clearances to non-combustible materials must be approved by the authority having jurisdiction.
•
•
This range top may be installed directly adjacent to existing 36” (91.4 cm) high base cabinets.
The range top CANNOT be installed directly adjacent to sidewalls, tall cabinets, tall appliances, or
other side vertical surfaces above 36” (91.4 cm) high. There must be a minimum of 6” (15.2 cm)
side clearance from the range top to such combustible surfaces above the 36” (91.4 cm) counter
height.
Within the 6” (15.2 cm) side clearance to combustible vertical surfaces above 36” (91.4 cm), the
maximum wall cabinet depth must be 13” (33.0 cm) and wall cabinets within this 6” (15.2 cm) side
clearance must be 18” (45.7 cm) above the 36” (91.4 cm) high countertop.
Wall cabinets above the range top must be a minimum of 42” (106.7 cm) above the range top
cooking surface for the full width of the range top. This minimum height requirement does not
apply if a range top hood is installed over the cooking surface.
•
•
9
Loading ...
Loading ...
Loading ...