User Manual AcuRite 00603A3 Thermometer

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY

SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device.

Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate

used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/

standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals. Battery contains

mercury. Do not put in trash. Recycle or manage as hazardous waste.

2

1

1. Remove the two small Phillips type screws with a small Phillips screwdriver.

2. Remove the battery compartment cover carefully as to not lose the screws.

3. Remove the small plastic tab from the battery compartment (initial setup only). To

replace battery, remove and safely discard the old battery (see disposal safety

info below). Insert a new CR2032 battery, paying close attention to the polarity

markings.

4. Replace the battery compartment cover and screws, making sure the battery is still

installed correctly.

Instruction Manual

Digital Window Thermometer