Gorenje IT612SY2W 60cm Induction Cooktop

User Manual - Page 14

For IT612SY2W.

PDF File Manual, 28 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
452969
Induction cooking hob is also fi tted with a built-
in overheating protection device that protects the
electronic parts from damage. The protection device
operates at several levels. When the cooking zone
temperature increases considerably, the cooking power
is reduced automatically. If this is not enough, the power
of currently heated cooking zones is reduced further
or shut o entirely. In this case, “E2” will be indicated
on the display. When the hob has cooled down, entire
cooking hob power is again available.
Select the timer by simultaneously pressing the »–«
and »+« sensor (E). Timer settings are displayed on the
upper two display units (H), during which time the lower
two display units are switched o .
Timer setting is only displayed for 10 seconds; then, the
display switches back to power level.
You may choose two operating modes:
a) Shut-o timer – the timer function is connected to
the selected cooking zone. When the time expires, the
cooking zone is switched o automatically.
b) Minute minder – timer function only has warning/alarm
functionality. When the clock runs out, only an acoustic
signal is emitted.
Activating and setting the timer
Select the timer by simultaneously pressing the »–« and
»+« sensor (E).
- If you have previously selected a cooking zone so that
the corresponding display unit is lit more intensively,
then the timer will be set for that cooking zone. The
decimal point next to the power level indicates that
the timer has been activated.
- The timer (minute minder) can also be set when no
cooking zone is selected, if you wish to be warned of
something other than the cooking process. Activated
timer (or minute minder) will be indicated with two
ashing decimal points next to the display unit.
• Set the cooking time by pressing the »–« or »+« sensor
(E). (Pressing »–« fi rst will set the timer to 30 minutes. If
you press and hold the sensor, the setting on the display
will change at an increasing rate.)
Timer
14
Loading ...
Loading ...
Loading ...