USE +
INSTALLATION
MANUAL
Bae-Pro Kit
2
Bae-Pro Kit
Read and conserve these instructions. Leave this instruction sheet with the homeowner.
CAUTION: Remove the protective plastic film covering the non-duct flue kit before installing it. Using additional installers is
advisable because of the large size and weight of the hood.
This Kit contains:
• Bafe-PROFilter(2pcsfor30”width,3pcsfor36”width,4pcsfor48”width)
• 1FrontGuideRail
• 1RearGuideRail
• 6pcs(10pcsfor36”widthversionorabove)3.5x9.5mmPanHeadScrews
Install Guide Rails
Remove the supplied filters from your range hood. The illustration below shows how to insert (at the front and rear) the guide
rails into the range hood.
3
Install the Bae-Pro filters
We recommend installing the side filters first and finishing with the center one(s).
1) Insert one end of the filter into the front guide rail.
2) Raise the other end toward the inside of the hood and insert it in the rear guide rail.
Use + Care
To empty the grease from the bae filter, remove it and
empty from the side opposite the handle. The bae filters
should be cleaned frequently. Use a warm detergent
solution. Wash more often if your cooking generates more
grease – when frying foods or using a wok, for example.
Remove the bae filters by pushing them towards the front
of the hood and rotating the filters downward. Bae filters
are dishwasher safe. Allow filters to dry completely before
reinstalling them in the hood. Clean all-metal filters in the
dishwasher using a non-phosphate detergent.
The filter may discolor if you use a phosphate detergent or
as a result of local water conditions, but this will not aect
filter performance.
This discoloring is not covered by the warranty.
This FORZA appliance is proudly made in Modena, Italy
by GlemGas S.p.A, a family owned company.
www.forzacucina.com
