Loading ...
Loading ...
Loading ...
13
FINAL INSTALLATION
4. Insert blade arm (R) through slots in the side of the
motor assembly (J). Align the holes of one blade arm
(R) with three motor screw holes in underside of the
motor assembly (J). Secure with three motor screws
(XX). Repeat this step for the remaining blade arms
(R).
Hardware Used
XX
Motor Screw x 15
5. Remove one of the three tter plate screws (M)
from the tter plate (L) and save. Loosen but do not
remove the other two tter plate screws (M).
6. Align the two key slots in the light pan (H) with the
loosened tter plate screws (M). Place the light pan
(H) over the two screws and turn the light pan (H)
clockwise. Then tighten the two tter plate screws (M).
Re-install the tter plate screw (M) that was removed
in the previous step and tighten rmly.
4
J
R
XX
5
M
L
6
H
M
Slot
Key Slot
Loading ...
Loading ...
Loading ...