Loading ...
Loading ...
Loading ...
9
Starting Your Air Conditioner
1.Press the power button to turn on the air conditioner.
Fan
NOTE: When the air conditioner is turned on for the first time
after itis plugged in, the display will show the current set
temperature and will run in the ECO control .
ON/OFF
1.Press MODE repeatedly until you see the indicator light glow
for the desired setting.
2.Choose Fan, Dry, Cool, Eco.
■
■
■
Cool -
Eco -
Cools the room.
■
ON/OFF
ON/OFF
TimerSleepFilterTimerSleepFilter
FAN FAN
MODE
LowMed
High
LowMed
High
FAN FAN
LowMed
High
LowMed
High
Dry
Fan
Cool
Eco
Dry
Fan
Cool
Eco
MODE
MODE
Dry
Fan
Cool
Eco
Dry
Fan
Cool
Eco
MODE
CONNECTCONNECT
■
■
Press the plus UP button to raise the temperature. Each (∧)
time you press or hold the plus button, the UP (∧)
temperature will go up 1°F (1°C) until it reaches 86°F (30°C).
Press the minus DOWN button to lower the temperature. Each (∨)
time you press or hold the button, the temperature DOWN (∨)
will go down 1°F (1°C) until it reaches 61°F (16°C).
To change the temperature display fromFtoC ° °:
Press both the MODE and buttons at the sameDOWN (∨)
t ime for 5 seconds to switch the display from °F to °C.
Cools the room and save energy.
Temperature
FAN
- To
select
Fan
Only
mode.
Heat
Heat
NOTE:
The
Fan
button
will
operate
only
when the
Fan,Cool,ECO
or Heat mode has been selected.
1.Press
FAN
until
you
see
the
indicator
light
glow
for
the
desired
setting.
2.Choose
High,
Med,
Low.
■
High -
for
maximum
cooling
■
Med -
for
normal
cooling
■
Low -
for
quieter
cooling
NOTE:
In
ECO
mode,the Fan will run at low
speed when compressor turn off.
■
Heat - Heats the room.
NOTE:
Heat is available only for heating models.
NOTE:
Dry
mode
should
not
be
used
to
cool
the
room.
NOTE:
Select ECO mode to initiate this
function.
For
E-star models,
t
he
fan will continue to
run after
the
compressor shuts off
for 2 minutes(4minutes
for
the
first time)，
then
the
fan
will shuts
off for
10minutes .The fan then
cycles
run for 2
minutes
and 10 minutes off
intervals
until the room
temperature is above the
set
temperature, at
which
time the compressor
turns
back on and
Cooling
resumes.
■
Dry - Dries
the
room.
The
air
conditioner
automatically
selects
the
temperature.
Fan
runs
at
Low
speed
only.
After cleaning and replacing the filter, press the POWER
button for resetting and the FILTER light will go off.
2.
Select
mode.
See
"Mode".
3.
Select
fan
speed.
See
"Fan".
4.
Set
temperature.
See
"Temperature".
Mode
Loading ...
Loading ...
Loading ...