Loading ...
Loading ...
Loading ...
USING THE SENSOR PEN
B-62
Calibrating the Sensor Pen
Before using the sensor pen for the first time, be
sure to personalize it using “Sensor Function
Calibration” in the settings screen. Doing so
allows the machine to learn the position in which
you usually hold the pen.
Hold the sensor pen at a comfortable angle and
then calibrate the machine according to the
procedure below.
Be sure to keep the sensor pen at the same angle
while calibrating the first and second points.
a
Press .
→ The settings screen appears.
b
Display page 6 of the settings screen.
c
Press while connecting the sensor
pen to the machine.
→ The Sensor Function Calibration screen appears.
d
Touch the first point of green dot marking
using the sensor pen.
* Touch on the needle plate cover.
a Needle plate cover
* A beep will sound and the a will change to red. (If
you cannot hear the beep, check that the volume
setting on page 4/7 of your settings is 1 or higher.)
* Press to redo the first point by starting over
from step
d.
e
Touch the second point of center of
cross-hair using the sensor pen.
* Touch on the point in the illustrations.
a Flat bed attachment
Loading ...
Loading ...
Loading ...