Loading ...
Loading ...
Loading ...
ExplosionHazard
Usenon-flammablecleaner.
Failuretodosocanresultindeath,explosion,orfire.
Boththerefrigeratorandfreezersectionsdefrost
automatically.However,cleanbothsectionsaboutonce
amonthtopreventodors.Wipeupspillsimmediately.
GENERAL CLEANING TIPS
• Unplug refrigerator or disconnect power.
• Remove all removable parts, such as shelves,
crispers, etc. Refer to sections in Using Your
Refrigerator for removal instructions.
• Use a clean sponge or soft cloth and a mild detergent in
warm water. Do not use abrasive or harsh cleaners.
• Hand wash, rinse and dry all surfaces thoroughly.
• Plug in refrigerator or reconnect power.
OUTSIDE
Waxing external painted metal surfaces helps provide rust
protection. Donot wax plasticparts.Wax painted metal surfaces
at leasttwice a year using appliancewax (or auto pastewax).
Apply wax with a clean, soft cloth.
Forproducts with a stainless steel exterior,use a clean sponge
or softcloth and amild detergent in warm water. Do not use
abrasive or harsh cleaners. Drythoroughly with a soft cloth.
INSIDE WALLS (allow freezer to warm up so
cloth won't stick)
To help remove odors, you can wash the inside of the
refrigerator with a mixture of baking soda and warm water.
Mix 2tablespoons baking soda to 1 quart of water (26 g soda
to 1 liter water.) Be sure the baking soda is completely
dissolved so itdoes not scratch the surfaces of the
refrigerator.
_, CAUTION: While cleaning the inside, DO NOT spray water
on surfaces.
DOOR LINERS AND GASKETS
Do not use cleaning waxes, concentrated detergents,
bleaches, or cleaners containing petroleum on plastic
refrigerator parts.
PLASTIC PARTS (covers and panels)
Do not use window sprays, abrasive cleansers, or flammable
fluids. These can scratch or damage the material.
28
CONDENSER COILS
Remove Back cover.
Use a vacuum cleaner with an
extended attachment to clean
condenser coils. Vacuum coils
when dusty or dirty. Coils may
need to be cleaned as often as
every other month.
LIGHT BULB REPLACEMENT
Electric Shock Hazard
Before replacing a Compartment Lamp, either unplug
the refrigerator or turn off power at the circuit breaker
or fuse box.
NOTE: Moving the control to the OFF position
does not remove power to the light circuit.
NOTE: Some models have LED interiorlightingand service
should be performed by a qualifiedtechnician.
To change Refrigerator Compartment Lamp
1. Unplug Refrigerator, or disconnect power at the circuit
breaker.
2. Release 2 screws.
3. Hold both ends with your both hands and pull it downward
to remove it.
"' t\
• When you are finished, reconnect the refrigerator to the
electrical source and reset the controls (Thermostat,
Refrigerator Control, and or Freezer Control, depending on
the model) to the desired setting.
Loading ...
Loading ...
Loading ...