Loading ...
Loading ...
Loading ...
FILL IN DATES
,svo0COMPLETE _....
REGULAR SERVICE _'_/_(,_"_-_/_j_"SERVICE DATES
Check Brake Operation t_ / _1
Check Tire Pressure
Check Operator Presence and
T Intedock Systems
R Check for Loose Fasteners ll_ I_s II_
A Sharpen/Replace Mower Blades _3
T Lubrication Chart If
0 Check Battery Level
R Clean Battery and TerminaLs If
Check TransaxLs Cooling t# #
Check V-Belts
Check Engine Oil Level V' q_#
Change Engine Oil (with oil filter) V'I,; V'
E Change Engine Oil (without oil filter) I1_1,=
N clean Air Filter _;
G Clean Air Screen
al Inspect Muffler/Spark
Arrester
1/
E Replace Oil Filter (if equipped) t,_l.;
Clean Engine Cooling Fins If;
Replace Spark Plug _"#z If
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 - Change more often when operating under a heavy load or
in high ambient temperatures,
2 - Service more often when operating in dirty or dusty ¢ondition.s.
3 - Replace blades more often when mowing in sandy SOil.
4 - Not required if equipped with maintenance-free battery.
5 - Tighten front axle pivot bolt to 35 ft,-Ibs, maximum.
Do not ovenighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain tractoras instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper opera-
tion.
5. Check for loose fasteners.
LUBRICATION CHART
OSF )indle(_)
Zerk Zerk
(_ Wheel_
Wheel _ Bearing
Bearing zerk
zerk
(1) Mandrel!
Zerks
General Purpose Grease
_) Refer to Maintenance "ENGINE"
Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry,
powdered graphite type lubricant spar-
ingly.
17
Loading ...
Loading ...
Loading ...