Loading ...
Loading ...
Loading ...
6
Electrical Requirements for Brazil Only
Residence mains:
The mains wires must be of copper
with a minimum cross-section per ABNT
(NBR-5410.)
To protect this appliance and the mains
against over loading, this appliance
must be connected to a circuit that is
protected with a thermo-magnetic
circuit breaker.
If the household circuit does not include
a circuit breaker, contact an electrician
to have one installed.
Electric outlet:
F or your safety and to avoid damage to
your product, it is very important that
your product is earthed correctly.
Your appliance power cord features a
hexagon-shaped plug, 10A, per ABNT
(NBR 14136).
Your residence electrical installation
must have a suitable electric outlet for
this type of plug. If not, it is your
responsibility to have one installed
by a qualified electrician.
Use appropriate outlet type for your
appliance plug, as shown below:
Before operating
this appliance,
make sure the
main voltage at the
installation site is
the same as indicated
on product technical
data label.
This information is also included on the
label attached to your appliance’s cord
near the plug.
IMPORTANT:
• If it is necessary to convert your
127V appliance to 220V, use a
1.0 KVA stabiliser.
• If it is necessary to convert your 220V
appliance to 127V, use a 1.0 KVA
stabiliser.
• Never plug your
appliance into
multi-plug adapters
with another
appliance
in the same socket.
Do not use an
extension cord. This type of
connection may cause electrical
overload in the mains, and can
damage the appliance and could
cause a fire. The appliance should
be plugged into its own outlet.
• In case of oscillation in mains voltage,
install an automatic voltage stabiliser
with minimum rating of 1500 Watts
between the appliance and the
socket.
• If the cord of this appliance is
damaged, it must be replaced.
Contact your nearest authorized
KitchenAid Customer Care Center.
Hand Blender Safety
W10508885B_EN.indd 6 8/28/2012 10:16:40 AM
Loading ...
Loading ...
Loading ...