Loading ...
Loading ...
Loading ...
13
APPLYING SEAL
The Gas Cooktop has a special seal which prevents liquid from infiltrating into
the cabinet. Be sure to strictly follow these instructions in order to correctly ap-
ply this sealing tape before inserting the Gas Cooktop into the benchtop.
• Remove all trivets and burner caps then turn the Gas Cooktop upside down,
make sure you carefully place it upside down to not damage the ignition
plugs and the thermocouples.
• Remove the backstrip of the sealing tape.
• Make sure when applying the sealing tape to correctly position it on the
outer edge of the cooktop. The ends must fit together without overlapping.
• Once evenly and securely fixing the seal to the cooktop, press it firmly in place.
• Do not use a silicon sealant or sealands of any types to seal the appliance
against the benchtop when placing it. The cooktop may need to be removed
for future needs such as servicing or repairs.
INSTALLAING AND MOUNTING THE COOKTOP
Once you have installed the seal underneath the cooktop
carefully turn it back to the right side up and lower it gently into the cutout in
your benchtop. Press the side down gently so that the cooktop is resting firmly
on the benchtop surface.
• Now that the Cooktop is in place, secure the gas cooktop with the mounting
brackets supplied. (see below drawing) There are four slots on each corner
underneath the cooktop where you can fix the brackets. (K)
• Make sure when fixing the brackets that you also fix in the screw (V)
provided to help hold the cooktop in place.
INSTALLATION (Cont.)
NOTE: Depending the thickness of the
bench (40-50mm). Tighten the screw
until it holds onto the benchtop firmly.
Be sure to not overtighten it.
Loading ...
Loading ...
Loading ...