Loading ...
Loading ...
Loading ...
12
Operation
REMOVING THE COLLECTED WATER
There are two ways to remove collected water:
1. Use the bucket
When the bucket is full, remove the bucket and empty it.
2. Continuous draining
Water can be automatically be emptied into a oor
drain by attaching the dehumidier to a water hose with
a female threaded end. (NOTE: On some models, the
female threaded end is not included)
Note: Do not use this operation when the outdoor
temperature is equal to or less than 32°F (0°C),
otherwise the water will freeze, causing the water
hose to block up and the dehumidier may be
damaged.
water outlet
Remove the
plastic cover
by counter-
clockwise
rotation
Female
threaded
end
Water
hose
Note:
- Make sure the connection is tight and there is
no leaking.
- Lead the water hose to the oor drain or a
suitable drainage facility, the drainage facility
should be lower than the drain outlet of the
dehumidier.
- Be sure to run the water hose sloping downward
to let the water ow out smoothly.
- When the continuous drain feature is not being
used, remove the drain hose from the outlet.
Press the
power cord
buckle into
the rear cover.
Loading ...
Loading ...
Loading ...