Loading ...
Loading ...
Loading ...
4. INTRODUCTION
4.1 SCOPE
This cordless impact driver is designed for use with insert bits and sockets, intended for a variety
of tasks where a high level of torque is required. It is intended for domestic use. Any other
application is considered misuse.
This power product is supplied “naked”; without battery pack or charger. Draper 20V Power
Interchange tools all use universal 2.0 and 4.0Ah batteries and chargers, enabling each battery to fit all
tools within the range (see the table on page 11 for the batteries and chargers available).
4.2 SPECIFICATION
Stock No................................................................................................................................... 89520
Part No. ............................................................................................................................... CID20SF
Batteries (sold separately):
Stock No. .................................................... 89437.............................................................. 89433
Part No..................................................... B202LISF....................................................... B20LISF
Type ............................................................ Li-ion ............................................................... Li-ion
Rated Voltage ..............................................20V ...................................................................20V
Rating ......................................................... 2.0Ah ..............................................................4.0Ah
Chargers (sold separately):
Stock No. .................................................... 89425.............................................................. 23793
Part No......................................................... CB20 .......................................................... CB203.5
Rated Voltage ............................................ 230V~ .............................................................230V~
Rated Frequency ........................................ 50Hz ................................................................50Hz
Rated D.C. Output Voltage .........................21.5V...............................................................21.5V
Rated D.C. Output Current .......................... 2.4A ................................................................. .3.5A
Protective device rated current ...................... 8A ...................................................................... 8A
Construction .............................................. Class II .......................................................... Class II
Revolutions Per Minute (no load) ................................................................................. 0 – 2800r/min
Drive spindle........................................................................................................... 1/4" Female Hex.
Maximum Torque.................................................................................................................... 180Nm
Impact rate .....................................................................................................................0 - 3600bpm
Sound Pressure Level*.....................................................................................98.6dB(A), K=3 db(A)
Sound Power Level** .....................................................................................109.6dB(A), K=3 db(A)
Vibration Level...................................................................................................12.5m/s
2
, K=1.5 m/s
2
Weight (machine only)............................................................................................................. 1.24kg
4.3 HANDLING & STORAGE
Although this product is small in size, care must still be taken when handling and lifting. Dropping
this power tool will have an effect on the accuracy and may also result in personal injury. This
product is not a toy and must be respected.
The environment can have a negative result on this product if not careful. Damp air can gradually
corrode components. If the product is unprotected from dust and debris, components will become
clogged. If not cleaned and maintained correctly or regularly, the machine will not perform at its best.
* Continuous A-Weighted Sound Pressure Level at the workstation in accordance to prEN ISO 15744:1999
and declared according to EN ISO 4871.
** A-Weighted Sound Power Level in accordance to prEN ISO 15744:1999 and declared according to EN ISO 4871.
- 5 -- 16 -
Motor does not start.
– Battery no charge.
– Battery faulty or
damaged.
– Re-charge battery.
– Replace battery.
Motor runs, but slowly/ losing
power.
– Battery no charge.
– Battery faulty or
damaged.
– Re-charge battery.
– Replace battery.
Problems Possible cause Required action
10.1 MAINTENANCE
Regular inspection and cleaning reduces the necessity for maintenance operations and will keep
your tool in good working condition.
The motor must be correctly ventilated during tool operation. Avoid blocking the air inlets and
vacuum the ventilation slots regularly.
10.2 TROUBLESHOOTING GUIDE
Note: Remove the plug from the socket before carrying out adjustment, servicing or maintenance.
10. MAINTENANCE & TROUBLESHOOTING
Battery pack doesn’t charge
/
non-llumination
/
non
illumination of charger.
– Fuse blown in charger
plug.
– Charger faulty.
– Replace fuse.
– Replace charger.
Manufacture change 06/03/2018 AN.
Sound Pressure Level*…....95.1dB(A),
Changed to ........................98.6dB(A), K=
Sound Power Level**…......106.1dB(A)
Changed to ........................109.6dB(A), K
Vibration Level……….........15.87m/s2
Changed to........................ 12.5m/s2, K=
………..
Loading ...
Loading ...
Loading ...