Loading ...
Loading ...
Loading ...
INSTALLING
WATER FILTER
1. Remove blue bypass cap and retain
for possible later use.
2. Remove sealing label from end of
filter and insert into filter head.
3. Rotate gently clockwise until tilter
stops, and snap tilter cover closed.
4. Reduce water spurts by flushing air
from system. Run water continuously
for 2 minutes through dispenser until
water runs steady.
Additional flushing may be
required in some households
where water is of poor quality.
REPLACING
WATER FILTER
IMPORTANT: Air trapped in system
may cause water and cartridge to eject.
Use caution when removing.
1. Turn filter counterclockwise until it
releases from tilter head.
2. Drain water from tilter into sink, and
dispose in normal household
garbage.
3. Wipe up excess water in tilter cover
and continue with Installing Water
Filter, steps 2 and 3.
WHEN DO I CHANGE THE
WATER FILTER?
The filter should be changed
approximately every 6 months.
IMPORTANT: Condition of water and
amount used determines life span ot
water filter cartridge, tf water use is
high, or it water is ot poor quality,
replacement may need to take place
more often.
HOW DO I ORDER A
REPLACEMENT FILTEtl
CARTRIDGE?
Kenmore®replacement water filter
cartridge model 9005 is available
through Sears dealers and servicers.
You may also order through Sears by
using the information on the back cover.
I'M TRYING TO DISPENSE
WATERTO FLUSH THE
SYSTEM. WHERE'S THE
WATER?
During initial use, allow about a 1 to 2
minute delay in water dispersal to allow
internal water tank to fill.
WHATIF I CHOOSE NOT
TO USE THE WATER
FILTRATIONSYSTEM?
Dispenser feature may be used without
water filter cartridge, it you choose this
option, replace filter with blue bypass
cap.
!'11
m
13
Loading ...
Loading ...
Loading ...