User Manual Corsair CH-9309011-NA M65 RGB Elite – Wired FPS and MOBA Gaming Mouse – Adjustable Weight and Balance – Durable Aluminum Frame – 18,000 DPI Optical Sensor , Black

Documents for Corsair CH-9309011-NA

The following documents are available:
User Manual Photos
CH-9309011-NA photo
corsair.com/downloads
B E TTER
TOGETH ER
TUNABLE FPS GAMING MOUSE
M65 RGB ELITE
ENGLISH ENGLISH FRANÇAIS FRANÇAIS
A BOUTON CLIC GAUCHE
B BOUTON CLIC DROIT
C BOUTON CLIC MILIEU
D BOUTON D'AUGMENTATION DES PPP
E BOUTON DE RÉDUCTION DES PPP
F BOUTON SUIVANT
G BOUTON PRÉCÉDENT
H BOUTON SNIPER
I TÉMOIN LED DES PPP
J PATINS EN PTFE
K CAPTEUR DE JEU OPTIQUE
L SYSTEME DE POIDS
M CÂBLE DE CONNEXION USB
GETTING TO KNOW YOUR MOUSE
All mouse buttons are programmable through software. These represent the default settings.
A LEFT CLICK BUTTON
B RIGHT CLICK BUTTON
C MIDDLE CLICK BUTTON
D DPI UP BUTTON
E DPI DOWN BUTTON
F FORWARD BUTTON
G BACKWARD BUTTON
H SNIPER BUTTON
I DPI LED INDICATOR
J PTFE GLIDE PADS
K OPTICAL GAMING SENSOR
L WEIGHT SYSTEM
M USB CONNECTION CABLE
The weight of your M65 RGB ELITE can be
customized for your style of play.
> Turn over the mouse and find the three screws (L).
> Remove any of the three screws (use either a
screwdriver or a coin of the appropriate width).
> Remove the weight and replace the screw, or
remove the screw and weight, depending on
your preference.
ADJUSTING THE MOUSE WEIGHT SYSTEM
> Turn on your computer.
> Connect the mouse to available USB 2.0 or USB 3.0 port on your computer.
> Download the iCUE software from www.corsair.com/downloads.
> Run the installer program.
> Follow instructions for installation.
SETTING UP YOUR MOUSE PRÉSENTATION DE LA SOURIS
Tous les boutons de la souris peuvent être programmés à l'aide d'un logiciel. Voici les paramètres par défaut.
Le poids de votre souris M65 RGB ELITE peut être personnalisé pour s'adapter à votre style de jeu.
> Retournez la souris et trouvez les trois vis (L).
> Retirez n'importe laquelle des trois vis
(utilisez un tournevis ou une pce de monnaie ayant la largeur appropre).
> Retirez le poids et replacez la vis ou retirez la vis et le poids en fonction de vos préférences.
AJUSTER LE SYSTÈME DE POIDS DE LA SOURIS
> Allumez votre ordinateur.
> Branchez la souris sur un port USB2.0 ou USB3.0 disponible sur votre ordinateur.
> Téchargez le logiciel iCUE sur www.corsair.com/downloads.
> Exécutez le programme d'installation.
> Suivez les instructions d'installation.
CONFIGURATION DE LA SOURIS
For use only with NRTL listed end product
and Mouse Rating: 5V 200mA
L
A B
C
F
K
L
J
H
G
D
I
E
LM
A B
C
F
K
L
J
H
G
D
I
E
LM
CAUTION!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user authority to operate the equipment.
WARNING: Changes or modifications not expressly approved by CORSAIR MEMORY, Inc could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
> Reorient or relocate the receiving antenna.
> Increase the separation between the equipment and receiver.
> Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
> Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
L
Loading ...
Loading ...
Loading ...