Loading ...
Loading ...
Loading ...
• • _ i_111i, T i i i iii -- , i
ASSEMBLY
' i i i
INSTALL MULCHER PLATE
(See Figs. 5A and 5B)
- tnStall two latch hooks to mulcher plate using screw,
washer, lock washer, and weld nut as shown.
NOTE: Pre-assemble weld nut to latch hook by inserting
weld nut from the top with hook pointing down.
• Tighten hardware securely.
° Raise and hold deflector shield in upright position,
• Place front of mulcher plate over front of mower deck
opening and slide into place, as shown.
• Hook front latch into hole on front of mower deck.
,, Hook rear latch into hole on back of mower deck.
i i ,i iii, ii ' , ii
i & CAUTION: Do not remove discharge
guard from mower. Raise and hold
guard when attaching mulcher plate
and allow it to rest on plate while in
operation,
I i [ i IH i i !
TO CONVERT TO BAGGING OR
DISCHARGING
Simply remove mulcher plate and store in a safe place.
Your mower is now ready for discharging or installation of
optional grass catcher accessory.
NOTE: It is not necessary to change blades, The mulcher
blades are designed for discharging and bagging also.
i, ...... , ,
WELD NUT HOOK POINTS
FROM THE TOP DOWN
LOCK '_t_
WASHER
WELD_
NUT _
LATCH
HOOK
WELD
NUT
LATCH LOCK
HOOK WASHER
DEFLECTOR
SHIELD
FIG. 5B
LATCH
HOOKS
,/CHECKLIST
BEFORE YOU OPERATE AND ENJOY YOUR NEW
TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE
THE BEST PERFORMANCE AND SATISFACTION FROM
THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST:
v" All assembly instructions have been completed.
,/ No remaining loose parts in carton.
,/ Battery is properly prepared and charged. (Minimum
1 hour at 6 amps).
,/ Seat is adjusted comfortably and tightened securely.
,/ All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
,/ Be sure mower deck is properly leveled side-to-side!
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling).
,/ Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.
,/ Check wiring. See that all connections are still secure
and wires are properly clamped.
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA A TTENTION TO THE FOLLOWING IMPORTANT
ITEMS:
,/ Engine oil is at proper level•
¢ Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
,/ Become familiar with all controls - their location and
function. ©perate them before you start the engine.
,/ Be sure brake system is in safe operating condition.
10
Loading ...
Loading ...
Loading ...