Loading ...
Loading ...
Loading ...
- 8 -
03/2020
Copyright © 2020, Fast ČR, a.s.
EN
Deep fryer
User's manual
■ Prior to using this appliance, please read the user's manual thoroughly, even in
cases, when one has already familiarised themselves with previous use of similar
types of appliances. Only use the appliance in the manner described in this user’s
manual. Keep this user's manual in a safe place where it can be easily retrieved for
future use. In the event that you hand this appliance over to somebody else, make
sure to also include this user's manual.
■ Carefully unpack the appliance and take care not to throw away any part of
the packaging before you find all its parts. We recommend saving the original
cardboard box, packaging material, purchase receipt and responsibility statement
of the vendor or warranty card for at least the duration of the legal liability
for unsatisfactory performance or quality. In the event of transportation, we
recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Lid
A2 Viewing window for inspecting the
frying process
A3 Frying basket from chrome-plated
steel
A4 Removable basket handle
A5 Fixed basket bracket for draining
the frying medium
A6 Heating element
A7 Frying pot
A8 Deep fryer body
A9 Lid handle
A10 Vents
A11 Control elements
A12 Heating module with a power cord
compartment
A13 Minimum and maximum frying
medium level marks
A14 Handles of the deep fryer unit
They are heat-resistant and prevent
any burns and enable the handling
of the appliance while it is operation
without the need for protective
gloves
B1 Handle wires B2 Wire holder
C1 Digital display
C2 ON/OFF button (start/stop)
Serves to start and stop deep frying
C3 MODE button
Enables the selection of one of five
preset deep frying programs
C4 TIME button
Enables the setting of a frying time
in the range from 1 to 99 minutes in
1-minute increments.
C5 TEMP button (temperature)
Enables the setting of a frying
temperature in the range from 110
to 190°C in 5°C increments.
D1 Cover plate
D2 Metal filter
D3 Transparent glass
INTENDED USE OF THE DEEP FRYER
■ This deep fryer is intended exclusively for deep frying food using suitable oil or
shortening fat. It is not intended for heating water or other liquids or for cooking
food directly in the frying pot without the use of a frying medium.
BEFORE FIRST USE
■ Before first use, wash the lid A1, frying basket A3 with handle A4 and frying pot
A7 in a hot detergent solution. Then rinse all these parts with clean water and dry
them thoroughly with a fine wiping cloth. The frying pot can also be washed in a
dishwasher.
■ Also clean out the inner and outer parts of the deep fryer unit unit using a lightly
dampened wiping cloth and then wipe it dry. Never submerge the deep fryer unit
in water or any other liquid!
OPERATION
PREPARING THE DEEP FRYER FOR FRYING
■ Place the deep fryer on a suitable even surface that is out of children's reach. Always
position the handles of the deep fryer so that nobody can brush against them and
knock or tilt the deep fryer over, or spill its hot contents.
■ If you wish to place the deep fryer on a cooktop underneath a range hood, ensure
that the cooktop is turned off.
■ Take out the frying basket and insert the handle A4 into the frying basket by
squeezing the basket wires B1 towards each other with your fingers and insert the
bent ends into the holes in the bracket B2 on the basket. Then apply gentle pressure
to secure the wires in the bracket. An audible click will be heard.
■ Insert the dry and empty frying pot A7 into the deep fryer unit. Insert the heating
module A12 with the heating element A6 into the frying pot.
■ Pour the frying medium (deep frying oil or shortening/fat) into the frying pot. Only
use oils and shortening fats that are explicitly marked as "non-frothing" and suitable
for deep frying. This information is provided on the packaging or label.
Warning:
Never pour more frying medium into the frying pot than up to the
MAX mark and never less than up to the MIN mark.
Never pour any liquid, for example water, into the frying pot.
Never combine various types of shortening fats or oils together.
They could overflow out of the deep fryer.
■ Clean the top edge of the frying pot and any other parts, which have been soiled
while the frying pot was being filled.
FOOD PREPARATION
■ As a rule, cut food into equal-sized pieces to ensure that it cooks evenly.
■ If the food intended for deep frying is damp, then dry it first. Always season food
with spices only after frying and do not apply the spices above the frying pot or
during the course of frying.
■ If you wish to deep fry coated/battered food, ensure that it is evenly coated/battered
and that any excess breadcrumbs are tapped off because loose breadcrumbs spoil
the quality of the frying medium.
■ Certain types of food, such as doughnuts, can be deep fried directly in the frying pot
containing the frying medium without using the frying basket.
■ Cut large pieces of food, e.g. chickens, into smaller pieces. This will prevent
subsequent scalding when removing the food from the basket.
■ Do not place too many food pieces on top of each other, they could stick together.
■ Remove any excess ice from frozen foods since it could cause the oil to boil over.
■ Do not fill the basket more than halfway, otherwise the temperature of the frying
medium will fall and the frying result will not be optimal.
TURNING ON AND STAND-BY MODE
■ Connect the power cord plug to a power socket. The appliance will beep, button
C2 (ON/OFF) and button C3 (MODE) will be lit and P001 will appear on the display.
In this way the deep fryer enters the stand-by mode, meaning that it is ready for
operation.
USING THE PRESET PROGRAMS
■ The deep fryer has five preset programs enabling you to quickly and easily prepare
various types of meals without needing to set the time and temperature.
■ Repeatedly press button C3 (MODE) and select one of the programs from the table
below.
Program
number
Icon Food
Temperature
(°C)
Frying time
(mins)
P001
French fries 190 7
P002
Meat 180 5
P003
Prawns 170 6
P004
Chicken 160 6
P005
Mushrooms 150 5
■ Press button C2 (ON/ OFF). The display will show the current temperature of
the frying medium and the deep fryer will start preheating to the temperature
corresponding to the selected program. The preset time or target temperature
can be shown during the preheating process by pressing button C4 (TIME) or C5
(TEMP). After 5 seconds, the shown time/temperature will automatically switch back
to showing the current temperature of the frying medium.
Note:
If button C4 (TIME) or C5 (TEMP) is pressed more than once during the
preheating process, this will change the preset time or temperature. If
you wish to retain the initial program settings, then stop the preheating
process by pressing C2 (ON/OFF) and use button C3 (MODE) to again
select the same program and start it by pressing C2 (ON/OFF).
■ When the preheating process is finished, the appliance will beep and the display will
show the achieved temperature and the deep fryer will wait for your next action.
Continue according to chapter DEEP FRYING.
SETTING CUSTOM TEMPERATURE AND TIME
■ The deep fryer enables the setting of temperature and time according individual
preferences.
Note:
Information about the appropriate temperature is provided on
the labelling of the food or in the table in this user's manual, see
RECOMMENDED TIME AND TEMPERATURE TABLE.
■ To set a custom time, press button C4 (TIME). The button will be lit and the default
time of 07:00 minutes will start flashing on the display. Then repeatedly press button
C4 (TIME) to set the time in the range from 01:00 to 99:00 minutes in 1-minute
increments.
■ To set a custom temperature, press button 5 (TEMP). The button will be lit and the
default temperature of 190°C will start flashing on the display.
■ Then repeatedly press button C5 (TEMP) to set the time in the range from 110 to
190°C in 5°C increments.
■ Press button C2 (ON/ OFF). The display will show the current temperature of
the frying medium and the deep fryer will start preheating to the temperature
corresponding to the selected program. The preset time or target temperature
can be shown during the preheating process by pressing button C4 (TIME) or C5
(TEMP). After 5 seconds, the shown time/temperature will switch back to showing
the current temperature of the frying medium.
■ When the preheating process is finished, the appliance will beep and the display will
show the achieved temperature and the deep fryer will wait for your next action.
Continue according to chapter DEEP FRYING.
Loading ...
Loading ...