Loading ...
Loading ...
Loading ...
FILTER
It is recommended that you replace the filter
approximately every 6 months,
when the water filter indicator _\
( [_ ) turns on, or when the ice
and water dispenser noticeably
decreases output.
1. Remove the old filter.
• Press the push button to
open the filter cover.
NOTE: Replacing the filter
causes a small amount of
water (around 1 oz. or
25 cc) to drain. Place a cup
under the filter hole to catch
any waste.
• Firmly lock in the filter.
The cover will click back into
place.
3. After replacing the filter, flush 2.5 gallons through
filter before use (flush for approximately
5 minutes) and check the filter for leaks.
To reset the water filter status display and
indicator light, press the Filter Reset button in the
refrigerator menu screen.
• Pull the filter downward
and pull out.
2. Replace with a new filter.
• Take the new filter out of its packaging and
remove the protective cover from the o-rings.
With filter "tabs" in the horizontal position, push
the new filter into the manifold hole until it stops.
4. Filter Bypass Plug
You MUST use the filter bypass plug when a
replacement filter cartridge is not
available.
_i, CAUTION: DO NOT operate
refrigerator without filter or
filter plug installed.
NOTE: To purchase
replacement water filter,
__ Plug Bypass
visit your Sears store or Call 1-800-4MY-
HOME. Also visit us on the web at
www.sears.com/partsdirect.
27
Loading ...
Loading ...
Loading ...