Loading ...
Loading ...
Loading ...
Installation Instructions
1. Select a place with a strong, level fl oor.
2. Allow 5 inches (12.7 cm) of space between the back of the refrigerator and any adjacent wall.
3. Avoid direct sunlight and heat. Direct sunlight could damage the unit. Heat sources nearby will cause higher electrici-
ty consumption.
4. Avoid moist places. Too much moisture in the air will cause frost to form very quickly on the evaporator, and your
refrigerator will have to be defrosted more frequently.
LOCATION
Remove exterior and interior packaging, wipe the outside thoroughly with a soft dry cloth and the inside with a luke-
warm, wet cloth. Avoid placing the unit in a narrow recess or near any heat source, direct sunlight or moisture. Let air
circulate freely around the unit. Keep the rear of the refrigerator 5 inches (12.7 cm) away from the wall.
1. Thermostat Dial: For controlling the temperature inside the refrigerator. Turns the motor on as soon as the tempera-
ture rises above the desired level.
2. Freezing Compartment with Freezer Door
3. Refrigerator Shelves
4. Drip Tray: Catches the water that drips off the evaporator when defrosting.
5. Magnetic Gasket: Tight fi tting door seal keeps all the cooling power locked inside. No hooks or latches.
6. Bottle Rack: For tall, medium and large bottles.
7. CANSTOR™ Door Liner: Holds 355ml cans of pop, juice or beer.
FEATURES
Place the appliance fi rmly on a solid base. Some appliances have adjustable feet on the front side; use them to level the
appliance (some models only).
NOTE: This appliance is intended for FREE-STANDING INSTALLATION ONLY, and is NOT intended to be built-in.
This appliance is approved for INDOOR USE ONLY and is NOT intended for outdoor operation.
INSTALLATION
4
1
5
6
7
3
4
2
Loading ...
Loading ...
Loading ...