Loading ...
Loading ...
Loading ...
19
EN
TROUBLESHOOTING
Any problems or malfunctions that may occur can often be easily resolved.
Before contacting the After-sales Service, check the following table to see whether you can resolve the
problem yourself.
If the problem persists, contact your nearest After-sales Service Centre.
Read the safety instructions carefully
before carrying out any of the following work
PROBLEM POSSIBLE CAUSE REMEDY
The oven is not working.
Disconnection from the mains
electricity.
Fault.
Make sure that the oven is connected
to the main electricity supply.
Turn off the oven and restart it to see if
the fault persists.
Cooking will not start.
Temperature not set/thermostat
knob in the wrong position.
Turn the thermostat knob to the
temperature or the position you require
to activate the function you have
selected.
The time is flashing. Power cut.
You need to reset the time: Follow the
instructions given in the “Using the
appliance for the first time” section.
The display shows the letter “F”
followed by a number.
Software fault.
Contact you nearest Client After-sales
Service Centre and state the number
following the letter “F”.
The light is not working.
O ven OFF.
Bulb gone.
Turn the selection knob to select a
function and switch on the oven.
If the fault persists, follow the
instructions for replacing the bulb given
in the “Maintenance” section.
The door will not open
.
The door lock is malfunctioning
.
Turn off the oven and restart it to see
if the problem persists.
Cleaning cycle is activated
.
Please wait until the function ends and
the oven cools down.
Loading ...
Loading ...
Loading ...