Loading ...
Loading ...
Loading ...
Door Reversal
You will need to tilt the cooler backward to access the lower hinge which holds
screws. Do not tilt more than 45 degrees and do not lay the cooler flat on its side.
Tools Required: Philip head screwdriver, flat headed screwdriver and hexagonal
spanner.
1. Remove the top plastic hinge cover and set aside, then unscrew the 4 screws
from the metal bracket and set aside. Carefully remove the door and place it on
a cushioned surface.
2. Remove the hinge plug and plastic insert from the top of the door and fix them
to the opposite sides. For the RHGWC4SS & RHGWC4SS-LCK you will need to
remove the hinge stopper from the bottom of the door and fix it to the
opposite side of the door, ensuring it is fixed securely. For all other versions
this part is not applicable.
3. Remove the plastic insert on the left side of the cooler and fix it to the opposite
side.
4. Tilt the appliance no more than 45 degrees and remove the screw on the left
side of the cooler and set it aside. Then unscrew the 4 screws holding the
bottom door hinge in place, move it across to the opposite side and fix it into
position. Now fix the screw that you set aside to the right side of the cooler.
- 11 -
Loading ...
Loading ...
Loading ...