Loading ...
Loading ...
Loading ...
5
Cleaning Exterior surfaces:
Please note, abrasives and scouring agents can scratch range hood finishes and should
not be used to clean finished surfaces.
Stainless Steel finish cleaning instructions:
Clean exterior surfaces with a commercially available stainless steel cleaner.
CLEANING STAINLESS STEEL
1.
Position the lower section of backsplash on the wall. Center it side to side and mark
the mounting holes. Remove the lower section from the wall.
2.
Attach the lower section of the backsplash to the wall with the 6 screws (G) provided.
3.
Position
the upper section of the backsplash on the wall. The top position of the
upper section should be at least 1” above the bottom of the hood so the
recessed screws are covered. Center it side to side and mark the holes. Remove
the upper section from the wall.
4.
Peel off the double-sided tape. Attach the upper section to the wall with 3 screws
(G) provided.
5.
Press the upper section to the lower section to make sure the tape fully adheres to
the lower section.
INSTALLATION
WARNING! The backsplash should be installed before the hood is installed.
Loading ...
Loading ...
Loading ...