Loading ...
Loading ...
Loading ...
Installation
Door and Drawer Removal
Some installations require door/drawer removal to
transport the refrigerator to its final location.
To avoid electrical shock which can cause
severe personal injury or death, observe the
following:
• Disconnect power to refrigerator before removing
doors or drawee Connect power only after
replacing doors or drawer.
To avoid damage to walls and flooring, protect vinyl
or other flooring with cardboard, rugs or other
protective material.
1. Unplug power cord from power source.
2. Remove toe grille and bottom hinge
cover(s).
3. Remove top hinge cover from
refrigerator door by removing Phillips
screw and retain screw and cover for
later use.
4. Unscrew 5/,6"hex head screws from
top hinge to remove hinge and retain
all screws for later use.
5. Lift right side refrigerator door from " "
center hinge pin. Remove door
closure from center hinge pin on the
right side and retain for later use.
Disconnect wire harness on top
of left side refrigerator door top
hinge.
Release two-pin connector by
pressing junction point with a flat
blade screwdriver or fingernail.
Green ground wire remains
attached to the hinge.
Unscrew %" hex head screws
from top hinge to remove hinge
and retain for later use.
right
side
J door
closure
Lift left side refrigerator door, along with top hinge,
from center hinge pin.
Remove center hinge pin with a _/,_"
hex head driver and retain hinge pin
for later use.
Remove Phillips screws to remove
right and left hinges and retain all
screws for later use.
Remove both stabilizing brackets
with 3/;, hex head driver and retain
screws for later use.
Loading ...
Loading ...
Loading ...