Loading ...
Loading ...
Loading ...
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
Page 5 of 12
ASSEMBLY INSTRUCTIONS
INITIAL SETUP
Remove exterior and interior packing materials and connect the wine and
beverage cooler to power supply. Once it is plugged in, let it run for at least
30 minutes. Co not change the temperate or adjust any sengs at this
me.
INSTALLATION OF YOUR APPLIANCE
Use two or more people to move and install the appliance. Failure to
do so can result in back or other injury.
Place your appliance on a floor that is strong enough to support it
when it is fully loaded.
Choose a well-venlated area with temperatures above 60 and
below 90 .
This appliance is designed for built-in, recessed or free standing
installaon.
For built-in installaon, leave a 2” (50mm) space on each side and at
the top of the appliance to ensure proper air circulaon to cool the
compressor and condenser.
For freestanding installaon, leave the proper clearance around the
appliance. Below are the recommended cleara
nces:
Sides……………… 2” (50mm)
Top………………… 2” (50mm)
Back………………. 2” (50mm)
Even for built-in installaon, you must keep space on each side and
at the top/ if you plan to use the unit for a built-in applicaon, please
follow the requirements shown below:
Sides……………… 2” (50mm)
Top………………… 2” (50mm)
Back………………. 2” (50mm)
Loading ...
Loading ...
Loading ...