Loading ...
Loading ...
Loading ...
PRODUCT DATA SHEETS
Cyst Interior Water Filtration System Model WFI-NLCS200/NLCS200
i Tested and certified by NSF international against ANSi/NSF Standard |
42 for the reduction of Chlorine (Class 1)Taste and Odor and against
J
ANSi/NSF Standard 53 for the reduction of Lead, Cysts and Turbidity.
Capacity: 200 gallons (757 liters),
Service flow rate: 0.5 GPM (1.89 L!min.) @60 psi.
Substance Reduction U.S. EPA Average Maximum Average Minimum % Average % NSF Test
Aesthetic Effects MCL Influent Effluent Effluent Reduction Reduction Number
Chlorine Taste/Odor N/A 1.9 mg/L N/A 0.06 mg/L N/A 97% 994707
Particulate N/A 108,667/mL* N/A 45/mL N/A 99.96% 994711
Contaminant U.S. EPA Average Maximum Average Minimum % Average % NSF Test
Reduction MCL Influent Effluent Effluent Reduction Reduction Number
Cyst 99.95%** 157,750/mL 55/mL 1.0/mL 99.9987% 99.9996% 994710
Turbidity N/A 26 NTU 0.5 NTU 0.1 NTU 98.9% 99.5% 994710
Lead: @ pH 6.5 0.015 mg/L 0.160 mg/L*** 0.011 mg/L 0.001 mg/L 93.5% 99.4% 994708
Lead: @ pH 8.5 0.015 mg/L 0.158 mg/L*** 0.011 mg/L 0.001 mg/L 92.1% 99.3% 994709
• It is essential that operational, maintenance, and filter • Refer to the front cover or "Assistance or Service" section for
replacement requirements be carried out for this product to the Manufacturer's name, address and telephone number.
perform as advertised.
• Refer to the "Warranty" section for the Manufacturer's limited
Model NLCS200 Change the cartridge at least every 6-9 warranty.
months. Use replacement cartridge NLCS200, part# 9002.
2002 suggested retail price of $39.95 U.S.A./S49.95 Canada.
Prices are subject to change without notice.
The product is for cold water use only.
Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction
may be used on disinfected water that may contain
filterable cysts.
Application Guidelines/Water Supply Parameters
Water Supply City or Well
Water Pressure 30 - 120 psi (207 - 827 kPa)
Water Temperature 33 ° - 100°F (0.6 ° - 37.8 ° C)
* Test requirement is at least 100,000 particles/ml of AC Fine Test Dust.
** Cyst performance is % reduction based on NSF Standard 53.
*** Test requirement is 0.15 mg/L _+10%. These contaminants are not necessarily in your water supply. Performance may vary based on local water
conditions.
® NSF is a registered trademark of NSF International.
22
Loading ...
Loading ...
Loading ...